PDA

View Full Version : Another interesting idea from Jack!

EFI Logics
11-10-2009, 09:55 PM
One of our good customers wanted to get a Tial BOV for his '04 STi because his current one was not holding like it should have been. However, he really didn't want to have to drop the car off so we could weld the flange onto his APS intercooler pipe and have it re-powdercoated as usual. So Jack had an idea that actually worked great. He simply welded a flange to a piece of metal, made it look nice, and bolted it right to the APS pipe, allowing the Tial BOV to use the factory placement! Looks and works great!

http://efilogics.com/customer/4%20-%20Subaru%20Customers/KevinS/KevinS_04STi_1.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/KevinS/KevinS_04STi_2.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/KevinS/KevinS_04STi_3.JPG

http://efilogics.com/customer/4%20-%20Subaru%20Customers/KevinS/KevinS_04STi_4.JPG

- Pete@EFI
bigstick7
11-10-2009, 10:00 PM
Good 'ol Jack

That's a pretty cool idea
Crush
11-11-2009, 12:20 AM
Makes me want to trade my two half ass cars for a proper one...
subydude82
11-11-2009, 01:38 AM
That looks great! Nice work Jack!
Jim511
11-11-2009, 04:15 AM
We should get t-shirts made with a picture of jack on the front, with his winter hat half on half off, and on the back it should say "Good ol' Jack!" Just like good old tom...yea that was dumb, anyways, good work! looks good
Dusty B
11-11-2009, 11:56 AM
That piece looks like it was always meant to be there. Good work, looks great!
topend
11-11-2009, 06:55 PM
Nice! Any rubbing on the intake mani? Looks pretty close..
EFI Logics
11-11-2009, 09:46 PM
Everything seems to be good, plus, he has some hardened mounts, so that should decrease any chance of rubbing.

- Pete@EFI